Thursday, October 26, 2017

Always need to reinstall print driver to open printer properties. HP Laserjet 4200

Here's an issue that took some extra Google-Fu in order to get straightened out. Apparently there is a bug with some HP printer drivers that will make it give you an error that "The '(Name of Driver)' printer driver is not installed on this computer. Some printer properties will not be accessible unless you install the printer driver. Do you want to install the driver now?"


Luckily, this one can be fixed by a registry hack. Just make sure you're careful screwing around in the registry and you always create a backup every time unless you like to live dangerously like I do.

Click start, type 'Regedit' and then hit Ctrl-Shift-Enter to open it as an Administrator. Maybe you can just hit Enter too because I think it has to run as admin by default. I've gotten so used to that little key trick to always make sure I'm opening as an administrator.


Here is what you need to drill down to:

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Printers\"Name of HP Printer"\PrinterDriverData\HPTrayCount


Change HP Tray count to Decimal Value 18 instead of Hexadecimal Value 0. I don't remember where I found this but one other contributor said they changed it to Hexadecimal value 5 and that worked too.

Hopefully that does it for you!

Always need to reinstall print driver to open printer properties. HP Laserjet 4200

Here's an issue that took some extra Google-Fu in order to get straightened out. Apparently there is a bug with some HP printer drivers that will make it give you an error that "The '(Name of Driver)' printer driver is not installed on this computer. Some printer properties will not be accessible unless you install the printer driver. Do you want to install the driver now?"


Luckily, this one can be fixed by a registry hack. Just make sure you're careful screwing around in the registry and you always create a backup every time unless you like to live dangerously.

Click start, type 'Regedit' and then hit Ctrl-Shift-Enter to open it as an Administrator. Maybe you can just hit Enter too because I think it has to run as admin by default. I've gotten so used to that little key trick to always make sure I'm opening as an administrator.


Here is what you need to drill down to:

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Printers\"Name of HP Printer"\PrinterDriverData\HPTrayCount


Change HP Tray count to Decimal Value 18 instead of Hexadecimal Value 0. I don't remember where I found this but one other contributor said they changed it to Hexadecimal value 5 and that worked too.

Hopefully that does it for you!

Printer settings could not be saved. This operation is not supported. - Server 2012 R2

So here's a really annoying one and it has to do with printers. Of course right? It always printers or DNS. ALWAYS.

Anyway I wanted to change the driver on one of my deployed printers when I ran into this message:

"Printer settings could not be saved. This operation is not supported."


After some digging around, I was able to find the culprit. It's because there is little box that's ticked called "Share This Printer" under the Sharing tab.


Untick that box, click apply, install your new driver, then go back and tick that box again.


Also make sure you tick the box to List in the directory again if you had that on too because it gets turned off by default when you un-share it.

Printer settings could not be saved. This operation is not supported. - Server 2012 R2

So here's a really annoying one and it has to do with printers. Of course right? It always printers or DNS. ALWAYS.

Anyway I wanted to change the driver on one of my deployed printers when I ran into this message:

"Printer settings could not be saved. This operation is not supported."


After some digging around, I was able to find the culprit. It's because there is little box that's ticked called "Share This Printer" under the Sharing tab.


Untick that box, click apply, install your new driver, then go back and tick that box again.


Also make sure you tick the box to List in the directory again if you had that on too because it gets turned off by default when you un-share it.

Featured Post

How to enable WinRM via Group Policy

In order to remotely manage computers via Powershell, you must enable Windows Remote Management. Open Group Policy management. Creat...

Popular Tutorials